Product description
Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura® ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armor, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.
Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less traveled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.
Highlights
SEESMART CE-level 1 protection
Detachable hood
Prepared for SEESOFT CE-level 2 back protector insert
Extra information
Ventilation
Zipper at upper back
Zippers on lower arms
Zippers on upper arms
Waterproofing
hydratex|3L
A 3-layer construction; the hydratex|3L membrane has a layer of protective tricot laminated to the back of the membrane. This results in a waterproof and breathable membrane that is also very durable.
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Visibility
Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.
Laminated reflection on hood
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at collar
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Pockets
Two inner pockets
Waterproof slit pocket at waist
Slit pocket at back
A slit pocket at the lower back allows for easily accessible storage of personals where it doesn't interfere with the rider.
Adjustability
Adjustment tab at cuffs
Adjustment drawcord at hem
Features
Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.
Detachable hood
The zip-on hood can be easily removed from the jacket.
Adjustment drawcord at hood
Fit
Active fit
The Active fit is designed to provide full freedom of movement while minimizing any excess material that could limit mobility. It is strategically cut and tailored to fit the body where necessary, while allowing unrestricted movement during activity-focused movement.
Outer shell
Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
3L CORDURA® 750D ripstop
A three-layer CORDURA® with ripstop properties.
PWR|Shell ripstop stretch
Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.
