Product description
Tech fashion in practice
The hooded Saros WB jacket is meant to look more like veritable streetwear rather than PPE. The 3L softshell contributes to this dynamic. That said, it’s totally ready to take on the road thanks to the inclusion of inner SEESMART elbow and shoulder protection, along with a CE AA classification. Furthermore, WB stands for wind barrier. While the jacket itself is windproof - not waterproof – the inner membrane does help to prevent water pickup.
Three ways to express your style
Each Saros WB jacket comes with the same safety features but a different look to them. And instead of just changing up the colors, we offer them three different prints. There’s the non-traditional camo green variation, a tonal mélange grey, and one that has names of various places famous racetracks are in.
Highlights
SEESMART CE-level 1 protection
Prepared for SEESOFT CE-level 2 back protector insert
Jeans loop
Extra information
Insulation
WindBarrier®
The REV’IT! WindBarrier® membrane is laminated between two separate layers of fabric: a stretchable outer layer, and a soft fleece inner layer. This combination blocks against wind and helps repel water. Stopping the wind and rain helps prevent hypothermia, and improves a rider’s level of comfort and warmth.
Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Pockets
Inner pocket
Two stash pockets at front
Fit
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
Lining
3D mesh
Mesh
Features
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Fixed hood
Button fixation for hood
Thanks to the Button fixation the hood stays in place during the ride, preventing the wind from reaching the inside of the hood.
Adjustment drawcord at hood
Knitted cuff
The knitted cuffs block wind to keep you warm and comfortable.
Protective features
Thumb loops
Visibility
Laminated reflection on hood
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
Laminated reflection at front
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.
